1. Join the
1
16
" balsa W1 and W1A parts together with thin CA, to make the main spar, W1.
2. Join the
1
16
" balsa W2 and W2A parts together with thin CA, to make the rear spar, W2.
3. Glue the plywood W1R spar reinforcements onto W1, with thick
CA. BE SURE to align them properly, as shown on the plans.
4. Glue the plywood W2R spar reinforcements onto W2, with thick CA.
BE SURE to align them properly, as shown on the plans.
W2
W2R
W2R
W1
W1R
W1R
W10
W10
W22
W22
TABLE
W9
W9
TABLE
W9
5. Glue the plywood W22 parts onto the
3
32
" balsa W10 parts, making
a LEFT and RIGHT as shown, with thick CA. Place the "dirty" side
of W10 "up".
6. READ THIS STEP!! Glue the
3
32
" balsa W9 parts onto the W10/W22
assembly, with thick CA. BE SURE to align them properly, and
make a LEFT and RIGHT. THE ENGRAVED TEXT ON W9 goes AWAY
from the W22 parts.
W22
W10
W10
W22
W9