8
!
Set the assembly on top of the fuselage with the notched part flush with the front of the windshield
post. This will make the parts angle back. Adjust the dowels so that they are parallel with the top
of the fuselage and the front and back wing mount parts are resting on the top of the fuselage.
!
Carefully remove the parts from the fuselage while holding them together so as not to lose their
alignment to each other. Remove the dowels and glue the parts together. Position the .060” carbon
fiber rods so that they are between the front and back part and even with the top of the notched
part. Glue the carbon rods in place.
!
Set the wing mount assembly back on the fuselage again with the notched part flush with the front
of the windshield post and glue in place.
Summary of Contents for C-180
Page 3: ...3 ...