Time-out Timer
The Time-out Timer feature helps extend battery life by preventing
accidental transmission. The radio will emit a continuous warning
tone after “PTT” button is pressed for 3 minutes and will stop
transmitting.
Keypad Lock
Scan
• For maximum clarity, hold radio 5 to 7 centimeters from mouth.
• Press and hold “PTT” and speak into the microphone. LED
indicator light glows continuously when transmitting.
• To receive messages, release “PTT”.
Volume
Channel
• Press “MENU” button and the channel number will begin to
flash.
• Use “UP” or “DOWN“ button to change channel.
• Press “PTT” button to set a new channel.
Interference Eliminator Code
• Press “MENU” button until the code number begins to flash.
• Use “UP” or “DOWN“ button to change the code.
• Press “PTT” to set new code.
You can specify a different code for each channel.
• To set a channel and code combination, press “MENU” button
and then press “UP” or “DOWN“ button to select the channel.
• Press “MENU” button again and then press “UP” or “DOWN “
button to select a code.
• Press “PTT” to exit the menu and to save the channel and code
combination.
To set another channel and code combination, repeat these steps.
6
7
Press "UP" button to increase or "DOWN" button to decrease
the volume. The volume level icon "U" is displayed. Select
volume level 1-8.
Interference eliminator codes help minimize interference from other
user groups on the same channel by providing a private code.
The Keypad Lock disables the “MENU”, “UP” and “DOWN“ buttons.
It also disables the scan function, but still allows you to use the “MON”
button to monitor the channel.
Press and hold the “LOCK” button for three seconds to lock or unlock
the keypad. When the radio is locked, the lock icon is displayed.
By scanning, you can monitor channels and codes for transmissions
and lock in on the one that is in use. This can be used to find someone
in your group who has accidentally changed channels and is
transmitting during your scan.
• To start scanning, briefly press and release the “MON” button.
• If you activate scan while your code is set to 0, then the radio will
check for any activity on each channel, regardless of the code in
use on that channel.
• If you activate scan while the code is set on 1 to 121, then the
radio will check for any activity on each channel, except the code
0 in use on that channel.
• While the radio is scanning, Scan Icon will display and the radio
will scroll through the channels.
• When activity is detected on a channel, the radio will stop
scanning and you will hear whatever transmissions are detected.
