background image

Safety Warnings

become too hot for the child’s skin. Always 
check surfaces before placing a child in the 
child seat.

•  Do not use any load bearing contact points 

other than those described in the instructions 
and marked in the child restraint.

•  The rigid items and plastic parts of a child 

restraint must be so located and installed that 
they are not liable, during everyday use of the 
vehicle to become trapped by a movable seat 
or in a door of the vehicle.

•  We recommended that any straps holding the 

restraint to the vehicle should be tight, that any 
straps restraining the child should be adjusted 
to the child's body, and that straps should not 
be twisted.

•  Important. Please ensure that any lap strap 

is worn low down, so that the pelvis is firmly 
engaged.

•  Never use this child restraint with any other 

base except ones that the manufacturer 
permits.

•  Always make sure all vehicle belts and harness 

straps are not twisted before each use.

•  Never leave the child in the child seat when 

the harness straps are loose or undone.

•  Do not leave your child in this child restraint for 

an extended period of time.

•  Always install the child safety seat in a rear-

facing position.

•  Never install the child safety seat forward-

facing.

•  Do not use alternative routings not shown in 

these instructions.

•  Make sure all folding passenger seats are 

property latched.

•  All occupants of the vehicle should be correctly 

restrained. Unrestrained passengers may 
be thrown into other passengers and cause 
serious injury or death in a crash.

Summary of Contents for Phil and Teds alpha Capsule Base





























Reviews: