Fastening Carrycot to Stroller Frame
To position support bracket, firstly put side 1 in
between the centre bars, so that is rests immediately above
heel rest. Clip side 2 onto frame side tube over the second
fastener (130mm/5ins) up from the heel rest.
1
Buckle safety strap between claws on support bracket.
2
130mm/5in
heel
rest
right
side
left
side
buckle
WARNING
• Before placing baby into position check that the Carrycot is secure and will not tip or fall.
Fasten safety strap C by looping it around bar behind
heel rest and fastening strap to itself.
5
Attach Carrycot sunhood to Carrycot by pushing the
sunhood support wire into plastic joint on both sides. Place
Carrycot onto support bracket and fasten fabric at end of
the Carrycot to frame side tubes and centre bar. Ensure
fabric passes over and around frame tubes and centre bar
(total of 4 fasteners). Ensure Carrycot sunhood is at the
opposite end from stroller handle bar. Check that Carrycot
rests horizontally, if not check position of support bracket
and fasteners are the same as shown in diagram.
3
Fasten safety straps to frame at points A & B.
4
A
B
C
Support Brackets
Support brackets are different for Terrain and
Urban models, and different for left and right. Check
label on bracket to identify model and left/right.
• Attach side 1 to centre bars
• Attach side 2 to stroller side tube
• Ensure bracket points up
side1
side 2
Example: Terrain left Double Carrycot Support bracket
Fastening Carrycot to Stroller Frame
To position support bracket, firstly put side 1 in
between the centre bars, so that is rests immediately above
heel rest. Clip side 2 onto frame side tube over the second
fastener (130mm/5ins) up from the heel rest.
1
Buckle safety strap between claws on support bracket.
2
130mm/5in
heel
rest
right
side
left
side
buckle
WARNING
• Before placing baby into position check that the Carrycot is secure and will not tip or fall.
Fasten safety strap C by looping it around bar behind
heel rest and fastening strap to itself.
5
Attach Carrycot sunhood to Carrycot by pushing the
sunhood support wire into plastic joint on both sides. Place
Carrycot onto support bracket and fasten fabric at end of
the Carrycot to frame side tubes and centre bar. Ensure
fabric passes over and around frame tubes and centre bar
(total of 4 fasteners). Ensure Carrycot sunhood is at the
opposite end from stroller handle bar. Check that Carrycot
rests horizontally, if not check position of support bracket
and fasteners are the same as shown in diagram.
3
Fasten safety straps to frame at points A & B.
4
A
B
C
Support Brackets
Support brackets are different for Terrain and
Urban models, and different for left and right. Check
label on bracket to identify model and left/right.
• Attach side 1 to centre bars
• Attach side 2 to stroller side tube
• Ensure bracket points up
side1
side 2
Example: Terrain left Double Carrycot Support bracket
