5 of 8
Installation of the bracket
Measure the centerline of the mantle. Mark with tape on
the wall.
S1
S2
S4
Locate at least two studs with a stud finder. Locate the
center of these studs by using a sharp awl or finish nail
poked through the drywall to locate each edge. Lag bolts
must be installed into the CENTER of the studs.
CL
CL
Please reference point 5 at page 4 to punch, please
make sure that the four mounting holes don't have
too big deviation.
S3
Cutout shown
for reference
CL
CL
CL
CL
CL
6mm(3/16”)
CUTAWAY VIEW
INCORRECT
CORRECT
wall plate
plaster/
dry wall
concrete
wall plate
concrete
plaster/
dry wall
CL
10mm(3/8”)
M
Please reference point 5 at page 4 to punch,If the main
wall is concrete or brick wall,you must use the expansion
pipe we provided in M.
CL
CL
CL
plywood wall
wood stud wall
CL
CAUTION
CAUTION
Do not drill into mortar joints!
10mm
(3/8”)
68mm
(2.7”)
6mm
(3/16”)
In order to have a better installa-
tion,it is necessary to inlay one
wire cassette on the wall.
68mm
(2.7”)
