12
M I X I N G / B L E N D I N G / C H O P P I N G /
KNEADING
A
CCESSORIES
USED
(
DEPENDING
ON
MODEL
)
- Bowl assembly (B), spindle (C), and blades
(D):
. metal blade (D1) for mixing, chopping,
kneading or blending.
. plastic kneading blade (D2) for kneading or
blending.
F
ITTING
THE
ACCESSORIES
- Check that the liquidiser drive cover is closed
(A1).
- Place the bowl (B3) on the bowl and
accessory drive (A3). Lock it into place using
the handle.
- Place the spindle (C) on to the bowl drive.
- Slide the metal blade (D1) or the plastic
kneading blade (D2) on to the spindle (C),
down to the bottom of the bowl.
- Place the ingredients in the bowl.
- Place the lid (B2) on the bowl and lock it into
place until it clicks.
Please note: To unlock the blades (D) from
the spindle (C):
- Place the assembly bowl on a stable worktop.
- Turn the spindle (C) clockwise, holding the
blade (D) by its upper section.
U
SAGE
AND
PRACTICAL
TIPS
Blending
- Turn the speed selector (A5) to position «2»
to start the appliance.
You can blend up to 1 litre of soup or stewed
fruits in 20 sec.
Chopping
- Turn the speed selector (A5) to position «2»
to start the appliance or for better control over
the chopping use the Pulse button (A6).
In 15 to 30 sec., you can chop up to 600g of
food:
. hard produce: cheese, dried fruits, certain
vegetables (carrots, celery...).
. soft produce: certain vegetables (onions,
spinach...).
. raw or cooked meat (boned, sinew removed
and diced).
. raw or cooked fish...
Kneading/Mixing
- Turn the speed selector (A5) to position «2»
to start the appliance.
- When kneading, stop the appliance as soon
as the pastry starts to form a ball.
You can:
. knead up to 1.2 kg of pastry/dough (biscuit,
shortcrust, and bread) in approximately
40 sec.
1
2
3
- Do not introduce any utensil (spoon,
spatula...) by the feeder tube.
- Do not place any ustensil which contains
metal in a microwave oven.
- Use the accessories one at a time.
- Handle the metal blade and discs with great
care: they are extremely sharp.
- You must remove the blades (D) and
spindle (C) before emptying the bowl of
its content.
- Never touch the parts when they are moving.
- Do not run your appliance empty.
Using your appliance
- Before using for the first time, wash all
accessory parts in warm, soapy water. Rinse
and dry.
- Place the motor unit on a flat, clean and dry
surface.
- Plug the appliance in.
- Pulse (intermittent operation): press the
button (A6) using successive pulses to give
you better control when preparing certain
foods.
- Continuous operation: turn the speed
selector (A5) to the required position «1» or
«2».
- Stop: turn the speed selector (A5) to
position «0».
- Using the chopping bowl drive: the
liquidiser drive cover (A1) must be locked.
- Using the liquidiser drive: make sure that
no accessories are locked on the bowl and
accessory drive.
Functions of your food
processor
. A
SSEMBLING
/ D
ISMANTLING
THE
BOWL
(B3)
The bowl is used with the following accessories
(depending on model):
. blades (D), discs (E), whisk (F), emulsifying
disc (G), citrus press (H), juice extractor (J).
- Place the drive (B3a) on the bowl.
- Lock the drive (B3a) with the nut (B3b) as
far as it will go.
- Dismantle the bowl assembly and clean it
after each use.
Ovatio.ATA/AT7.Eu11
16/07/04, 15:57
12
