![background image](http://html.mh-extra.com/html/moulinex/blender-jug/blender-jug_owners-manual_1839762010.webp)
7
Use the Auto Clean position to clean
the jug and blades easily and safely.
- P our hot water with a few drops of
washing up liquid into the mixer jug
(D). Close the lid.
- Give a few pulses by turning the
selector (B) to the "Auto Clean" posi -
tion.
- Disconnect the appliance.
- Remove the jug and rinse it and its
lid under running water. For more
effective cleaning, you can separate
the two elements of the pouring lid
(E and F) by turning the lid to position
(see diagram II).
- You can put the mixer jug and acces-
sories in the dishwasher
- Clean the motor unit (A) with a damp
cloth.Dry carefully.
- Never immerse the motor unit (A) in
water or under running water.
What to do if your appliance
does not wo r k ?
Get in touch with a MOULINEX appro-
ved service centre (see list in service
handbook).
You can customise your appliance and
get the following accessories from your
usual retailer of a MOULINEX appro -
ved centre:
Fines herbes accessories, grater
accessory, coffee mill accessories, fil-
ter.
PROBLEMS
POSSIBLE CAUSES
SOLUTIONS
Product does not
operate.
Plug is not connected
The lid of the jug or the acces-
sory is not correctly loc ked.
Accesory jug is not correctly
fitted to motor unit.
Connect the appliance to a
socket with the same voltage.
Check for correct positioning
of the jug or accessor y.
First position the lid on the
jug or the accessory and
then turn it clockwise .
Excessive vibration.
The product is not set on a
level surface.
Place the product on a le vel
surface.
Leaks from lid.
Blade does not tur n
easily.
Too great a volume of ingre -
dients.
Do not exceed maximum
level of jug (1.5l)
Pieces of food too big or too
hard.
Reduce size or quantity of
food.Add liquid.
The mixer jug or accessory is
incorrectly positioned on the
motor unit.
Check for correct positioning
of the jug or accessor y.
Pouring lid in open position
Place pouring lid in closed
position.
Cleaning
blender vivacio notice 1 16/06/04 10:04 Page 7