9
EN
Using your blender
Your blender has been designed to work in a variety of ways to suit
your blending needs.
1. Place the motor base of your blender on a flat, sturdy surface.
It is important that the surface be clean and dry. Assemble the
blender by following the assembly instructions. Once the jar is
assembled and is in position on the motor base, plug the unit
into an electrical outlet.
2. Put all necessary ingredients into the blender jar and replace the
cover. You may add more ingredients by lifting the measured
pour lid and dropping ingredients through the fill area. Replace
the measured pour lid after adding ingredients. Do not put
hands into blender jar while blender is plugged in.
Note: Add liquid ingredients first, then follow with solid
ingredi ents. This will provide more consistent blending and
prevent un necessary stress on the motor.
Note: To remove blender jar cover, lift edge of cover upward.
Lift ing measured pour lid will not remove cover.
3. Press the On/Off button. The blue indicator light will illuminate
and flash, indicating that the bender is turned on but no speed
has been selected.
4. Press high, low or ice crush buttons to determine the speed at
which you would like to blend the ingredients. Both the ‘On’
indicator light and activated speed indicator light will glow. The
blender will now be functioning at the desired speed. It is
