I N S T A L L I N G T H E M O T U U S B S O F T W A R E
18
5
Since this is the procedure for using FreeMIDI
separately from OMS, click FreeMIDI.
6
Proceed to Step 5 on page 13 and continue
from there to complete the FreeMIDI setup.
☛
Also be sure to choose the
Allow other
applications
option in FreeMIDI preferences of
FreeMIDI Setup as shown in Figure-14 on page 19.
In OMS Setup, choose
Edit menu>OMS MIDI
Setup
and make sure that the
Run MIDI in
background
option is
not
checked, as shown below.
OMS, WITH FREEMIDI USING OMS
If you plan to use both FreeMIDI and OMS
together, set up OMS as you normally would (see
OMS’s included on-line documentation for
assistance) and then follow this procedure for
FreeMIDI:
1
Make sure that FastLane is properly connected
to the computer.
2
Locate the
FreeMIDI Setup
program on you
hard drive. During installation, it is placed in the
FreeMIDI Applications folder on the top level of
your hard drive.
3
Double-click the
FreeMIDI Setup
application
icon to launch the program.
4
If this is the very first time you’ve run a
FreeMIDI program on this computer, you’ll be
asked if you want to use FreeMIDI or OMS as
shown below.
5
Since this is the procedure for OMS with
FreeMIDI using OMS, click the
OMS
button.
6
Go to “OMS” on page 16 and follow the
procedure for using OMS.
☛
If you don’t see the dialog above when you
run FreeMIDI Setup, refer to “Toggling
FreeMIDI’s use of OMS” below.
TOGGLING FREEMIDI’S USE OF OMS
If you have OMS, you can make FreeMIDI use it or
stop using it as follows:
1
Launch FreeMIDI Setup.
2
Choose
FreeMIDI Preferences
from the File
menu.
FastLane-USB manual/Mac Page 18 Friday, April 15, 2005 12:28 PM
