MOTU 8pre User Manual Download | Manualshive

Page: 59 / 68

background image

CHAPTER

59

12

MOTU SMPTE Setup

OVERVIEW

The 8pre can resolve directly to SMPTE time code
via any analog input, without a separate
synchronizer. The 8pre can also generate time code
via any analog output. The 8pre provides a DSP-
driven phase-lock engine with sophisticated
filtering that provides fast lockup times and sub-
frame accuracy. Direct time code synchronization
is supported by Cubase, Nuendo and other audio
sequencer software that supports the ASIO2
sample-accurate sync protocol.

Any analog input and output on the 8pre can be
used for time code (LTC) input and output,
respectively.

MOTU SMPTE Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Clock/Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Frame Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Reader section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Generator section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Setting up for SMPTE time code sync . . . . . . . . . . . . . . . . 62

Resolving Cubase or Nuendo to SMPTE time code. . . 63

MOTU SMPTE SETUP

The included MOTU SMPTE Setup™ software
provides a complete set of tools to generate SMPTE
for striping, regenerating or slaving other devices
to the computer.

CLOCK/ADDRESS

The

Clock/Address

menu (Figure 12-1) provides

the same global

Clock Source

setting as in MOTU

Audio Setup (“Clock Source” on page 28 in the
8pre manual), but it includes additional
information: each setting shows both the clock and
the address (time code or sample location),
separated by a forward slash ( / ). To resolve the
8pre to SMPTE time code, choose the

SMPTE /

SMPTE

setting in the Clock/Address menu. This

means that the system will use SMPTE as the clock
(time base) and SMPTE as the address.

FRAME RATE

This setting should be made to match the SMPTE
time code frame rate of the time code that the
system will be receiving. The 8pre can auto-detect

Figure 12-1: SMPTE Setup gives you access to your 8pre’s on-board SMPTE
time code synchronization features.

The Reader section provides

settings for resolving to video

and/or SMPTE time code.

The Generator section

provides settings for striping

SMPTE time code.

«
...
57
58
59
60
61
...
»

Summary of Contents for 8pre





































































Reviews:

No comments

Related manuals for 8pre

Brand: Amulet Hotkey Pages: 2

SD-CBALINEC-4E6I

Brand: Lindy Pages: 4

Brand: National Instruments Pages: 37

Brand: Gemtek Pages: 30

ALLEGRO USB 3.0 PCIe

Brand: Sonnet Pages: 3

Brand: Sinclair Pages: 24

Brand: Infineon Pages: 25

iPAQ Networking 10/100 Fast Internet PCI Card

Brand: Compaq Pages: 13

Brand: Compaq Pages: 220

Brand: Salient Systems Pages: 9

Brand: Manhattan Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands