7
2
1
Keep
E
pressed until the YELLOW LED
goes on
Place the finger touching the metallic
part until the BLUE LED goes on
WARNING
If just activated, there is a long series of audio signals along with a flashing red led which means that the accessory does not have the master creden-
tials memorised, immediately enter at least one master credential.
See first access programming
Place the memorised finger on the
sensor
WARNING
If no finger is placed after 8 seconds, a long sound
and fixed blue led goes on indicating entry in the
programming phase, see the PROGRAMMING part.
Put a TAG in front of the
E
key
A closing signal will be sent to the
paired device.
ESCUTCHEON ACTIVATION FOR OPENING
Activate as fingerprint reader
Activate as TAG reader
POSITIVE recognition of the fingerprint
and open command sent to the device
NEGATIVE recognition of the
fingerprint and the system returns to
stand-by
POSITIVE recognition of the TAG
NEGATIVE recognition of the TAG
and temporary deactivation
ESCUTCHEON ACTIVATION FOR CLOSING
Keep E pressed until the
YELLOW LED goes on
Keep 2 pressed
Summary of Contents for XTRACK 99.781
Page 19: ...19 ...
