5
Lock
2-wire intercom
control unit (“BUS”)
Electro-lock pulse
Relay
Bus-based connection
N.B.: The relay used must have electrical specifications that are compatible with the system in which it is installed.
- Bus-based connection to the control unit (two wires) via a voltage pulse relay
In this configuration the lock is controlled by a positive voltage pulse on Terminal 4.
The lock can be powered by a 12 to 24V current.
- Bus-based connection to the control unit (two wires) via a dry-contact relay
In this configuration the lock is controlled by a dry-contact (volt-free) relay.
The lock can be powered by a 12 to 24V current.
BUS-BASED CONNECTION
Lock
2-wire intercom control
unit (“BUS”)
Electro-lock pulse
Relay
Bus-based connection
To ensure correct operation and alignment between sensor and magnet of the XDRIN lock during closing, the door /
gate should be equipped with a door-closing device.
CLOSE-DOOR DEVICE
