99296GB - 12/14 - a_013811
SAFEGUARDING YOUR SECURITY
www.mottura.it
1 - INTRODUCTION
This charger is used to charge 6 rechargeable NiMH batteries ("D" size) with capacitance of 2200 mAh, to be used ONLY with Mottura XMODE M2.0 / F1.0
locks. Any other use is incorrect.
N.B. The wires are sized for installing the battery charger inside to the door.
2 - MECHANICAL FIXING OF DEVICE
Fix the battery charger on a DIN rail (EN 60715) (not supplied). Place the top of the case (TOP) on the rail and press until it clicks in place (black coupler
facing downward) at the bottom. To release it, simply press the black coupler down with a screwdriver to free the case.
3 - ELECTRICAL WIRING
The battery charger has 3 connectors:
X1
= 2-way to connect the power line supply (99.697) or power supply bypass (99.715)
X2
= 4-way to connect the battery charger wire (99.712) to the lock or to the external board
X3
= 3way to connect the battery case wire (99.703 or 99.704)
To make the connections, refer to your system’s wiring diagram in the lock installation manual.
Note
: The connection with wires 99.715 and 99.967 is optional, depending on your system’s power supply wiring diagram.
Before powering the system, check that you have correctly connected the wires on the Mottura power line adapter (art. 99.683) or on the electric striker
if present (model XMODE F1.0 only). Make sure that you have respected polarity as described in the lock installation manual. Insert the rechargeable
batteries according to the polarity shown, then switch on the system.
When the system has been installed, you should let the batteries charge for at least 2 hours before running any programming and/or test procedures.
TOP
BOTTOM
DIN RAIL
X3
X2
X1
4 - STARTUP
5 - TECHNICAL DATA
INPUT POWER SUPPLY
VOLTAGE / FREQUENCY
12 VDC ±10%
MAX DRAW
< 0,25 A
MAX POWER
3 W
PROTECTION INDEX
IP00
WORKING TEMPERATURE
Min -10 °C ÷ Max.+40 °C
MECHANICAL
WEIGHT
0,1 Kg
DIMENSIONS
54 x 110 x 33 mm
MATERIAL
Blend PC/ABS self-extinguishing UL94-V0
RECHARGEABLE
BATTERY
TYPE
"D" SIZE - NiMH
NUMBER
6
VOLTAGE
1,2 V
CAPACITY
2200 mAh
Attention: This battery charger must be used ONLY with rechargeable nickel-metal hydride (NiMH) batteries. If you try to charge any
other type of battery (alkaline, etc.), you may generate an explosion and cause harm to people and/or damage properties.
When the product (battery charger and/or batteries) has ended its life cycle, do not throw it away with domestic waste. Use the proper collec-
tion and recycling containers. For information and advice, ask local authorities or your Mottura retailer.
