Motrona GV204 Page 2 Operating Manual Download

Page: 2 / 12

Gv204_01c_oi_e.doc / Apr-16

Page 2 / 12

Version:

Description:

GV20401a/af/hk_Sept08

First edition

Gv20401b/ag/Apr.15

Some modifications. Safety Instructions & Technical Specifications renewed.

Gv204_01c_oi/Apr-16/ag

DIL-Setting = HTL in case of 5 V supply via +Vext. Modifications and additions
were made in the block diagram, note boxes and in chapter „Impulse Outputs“.

Legal notices:

All contents included in this manual are protected by the terms of use and copyrights of motrona GmbH. Any
reproduction, modification, usage or publication in other electronic and printed media as well as in the internet requires
prior written authorization by motrona GmbH.

Table of Contents

Safety Instructions and Responsibility ......................................................... 3

1.1.

General Safety Instructions ................................................................................... 3

1.2.

Use according to the intended purpose ................................................................ 3

1.3.

Installation ............................................................................................................. 4

1.4.

Cleaning, Maintenance and Service Notes ........................................................... 5

Compatibility Hint ........................................................................................ 6

Application .................................................................................................. 6

Block Diagram ............................................................................................. 7

Power Supply ............................................................................................... 8

5.1.

Supply via +VB from an unstabilized 10 ... 30 VDC source ................................... 8

5.2.

Supply via +Vext from a stab5 VDC source ............................................... 8

Impulse Inputs ............................................................................................. 9

Impulse Outputs and Output Levels ........................................................... 10

Dimensions ................................................................................................ 11

Technical Specifications ............................................................................ 12

Summary of Contents for GV204













Search results

Summary of Contents for GV204

Reviews:

Related manuals for GV204

Brands by name

Popular brands

Motrona GV204, Operating Manual

Search results

Summary of Contents for GV204

Reviews:

Related manuals for GV204

Brands by name

Popular brands