Dx350_06d_oi_e.docx / Jul-20
page 35 / 67
Continuation „Mode Velocity“:
WAIT TIME (S)
This parameter defines the period time of the lowest frequency, accordingly the time between two rising signal edges
detecting frequency 0 Hz. Frequencies with a period time higher than the set “WAIT TIME” will be detected as
frequency = 0 Hz.
0.00
The display value is retained until a new value is determined.
0.01
Frequency = 0 Hz, for frequencies below 100 Hz
…
99.99
Frequency = 0 Hz, for frequencies below 0,01 Hz
STANDSTILL TIME
This parameter defines the time setting for standstill definition.
A time of xx.xx seconds after detection " frequency = 0 Hz " the unit signals "standstill" and reactivates the start-up-
delays. Stand still detection can be set in PRESELECT MENU.
This STANDSTILL TIME is suitable at WAIT TIME unequal 0.000 only.
0.00
Shortest time
…
99.99
Longest time
