BY12512d_e.doc / Mai-08
Page 24 / 52
8.
Register List and Clarification
The register set is held on an EEPROM. The registers can only be programmed via serial link,
using the RS232 or RS485 interface.
The Software OS3.2 (included with delivery) allows easy downloading of complete register
sets, reading, copying and editing the parameters.
It includes also an adjust program and a test program for easy setup and commissioning.
The subsequent table shows all operational registers. Remarks "C00”, “C01" etc. indicate the
appropriate serial access codes. All parameters, with respect to their numeric values, are
internally limited to their permitted range. Register marked with * are only operative when you
select one of the index modes.
Parameter List
Operations Parameters
Setup Parameters
C00 Factor
1
C40 Mode
C01 Factor
2
C41 LV
Calculation
C02 Trim
Time
C90 Unit
NR.
C03 Integration
Time
C91 Baud
Rate
C04* Impulse
Index
C92 Serial
Form
C05* Offset
C45 Master
Direction
C06 Alert
C46 Slave
Direction
C07 Ramp
C47 Offset
Correction
C08 Stop
Ramp
C48 Gain
Correction
C09 Correction
Divider
C50 Gain
Total
C10 Phase
Adjust
C11 Index
Divider
C12 F1
Scaling
Factor
C13
Factor 1 Minimum
C14
Factor 1 Maximum
C15* Index
Window
C16 Sampling
Time
C17* Index
Mode
Fig. 16
