Step 1
To start assembly, insert the square tube several inches into the hitch. This will make things easier
by getting the carrier off the ground at a more comfortable height for assembly. You'll see more
details about the ZeroWobble Hitch Mount when you get to Step 5
NOTE: The square tube of the Max & Max+ carriers is bent slightly upward to reduce “hitch
droop”. The small crease on the top of the tube is not a defect.
Attaching MTX Platform to Square Tube
(A.)
Pro Tip (optional):
Attaching MTX Platform to
Square Tube
(
6
/
15
/2
2
)
2
For Max & Max + carriers
remove contents from MTX Platform box.
For m3 & Sport carriers
remove the square tube, MTX Platform and hardware from box.
