the remote control.
Insert the batteries into
HEAD
FOOT
1
HEAD BOARD
DC Power Cord
2
Make the bed completely flat with a flipping motion.
3
Install the mattress retainer bar one side after another.
HEAD BOARD
DC Power Cord
2
1
HEAD BOARD
DC Power Cord
HEAD BOARD
4
Uncoil the AC power cord, connect the DC power cord to the
power supply and then connect the power supply to the AC
power source.
Setup the power foundation with the bed frame and slat base.
AC Power Cord
AC Power Source
DC Power Cord
Power Supply
Take the bed out of the box, put it on the slat base, do not install
any legs. Uncoil the DC power cord (connected to the control box)
,
pull the DC power cord towards the direction of the AC power source
through either the bottom or the side of the bed frame.
AAA
AAA
AAA