Motorvac SteerClean-II 500-7100, Operator'S Manual

Page: 20 / 37

Manual #100-7100
20
Standard Fluid Exchange (Continued):
Standard Fluid
STEP FOUR: Connect the unit’s Battery
Cables to the vehicles battery. Red to
positive, black to negative. The
Ready
light will now be flashing.
STEP FIVE: Press the Start button. The
Ready light will now go solid. Follow the
audio prompt. Start the engine. When
the Cleaning light is flashing, turn the
steering wheel lock to lock at least twice.
STEP THREE: Remove the cap from the
vehicles Power Steering reservoir and
place the fluid
Wand inside. The position
of the ‘short’(suction) hose on the wand
will control the fluid level during the
service.
STEP SIX: Follow the audio prompt.
When the
Protecting light is flashing,
turn the steering wheel lock to lock at
least twice.