[email protected] www.motorvac.com
3
Safety Information and Precautions
To prevent personal injury and / or damage to vehicle or equipment:
• Use this equipment in the manner specified by the manufacturer.
• Understand operating procedures / Follow all safety precautions.
• Correctly connect power supply to battery and chassis ground.
• Use only Cool Smoke Fluid in the Cool Smoke HP. Altering the fluid, hoses, cables or any other
replacement parts will void the warranty; may cause machine malfunction; may cause damage to the
vehicle, to property or may cause personal injury.
• To view the dye deposit, use the included UV Phazer Black light and UV enhancing safety glasses.
• Do not use when vehicle engine is running.
• The 12-24V DC battery source you use to power the machine must be in good condition and fully
charged.
• Machine input pressure must be 90-150 psi. Operate the machine in an upright position.
TIP: Whenever possible allow the system to vent as far away from where the smoke is being
introduced. This will purge the air and quickly fill the system with smoke. Once the system is filled
with smoke, close the vent and allow the system to be pressurized.
WARNING: Do not overfill unit.
WARNING: This is a high pressure leak detection tool NOT suitable for
EVAP/fuel tank system testing. Use of this machine to test for leaks in EVAP
systems may cause serious personal injury and/or vehicle damage.
CAUTION: Wear gloves and safety goggles (user and bystanders) when
performing this service
