Basic Installation and Operation Guide VMX Series Digital Solid State Soft Starters 18 – 1000A
Page 21 of 27
Fn #
Function Description
Adjustment / Display Range
Setting
Increments
Factory
Setting
F030
thru
F039
Process Timer Functions
See Advanced Installation, Operation and Programming Manual,
Appendix 4 for details.
F040
thru
F047
Current and Ground protection
features
These features are disabled from factory. See Advanced
Installation, Operation and Programming Manual, section 5.6.8 for
details.
F048
thru
F050
Duty Cycle Lockout Timers
These features are disabled from factory. See Advanced
Installation, Operation and Programming Manual, section 5.6.9 for
details.
F051
Internal Protection Settings
1 – 63
See“ F051 Definition Table”
1
63
Enable
all
F052
Auto Reset
on Selected Faults
Fault Preferences 1 – 12
See Table 5.6.8:
”Auto-Reset Selected Faults”
1
4,
Phase
Loss
only
F053 Auto
Reset
Attempts
0 = Disabled, or 1-10 attempts
1
0
F054
thru
F059
Time and value displays for
lockouts in F048 – F050
Read only, no settings
F060
Aux Relay 1 setting
Operation # 1 – 26: see
”Aux. Relay Settings Table” below
1 1
F061
Aux Relay 2 setting
Operation # 1 – 26: see
”Aux. Relay Settings Table” below
1 2
F062
Aux Relay 3 setting
Operation # 1 – 26: see
”Aux. Relay Settings Table” below
1 16
F063
Aux. Relay Delay Timer
(for Operations 22-26)
0 (Disabled), or 1-999 seconds
1 second
0
No Delay
F064
Reserved for factory use
F065
thru
F068
Communications features
These features are disabled from factory. See Advanced
Installation, Operation and Programming Manual, section 5.6.11
for details.
1 0
F069
Reserved for factory use
F070
Parameter Lock
Customer Password
0 – 999
0 = Disabled
Any Other Numbers = Password
1 0
F071
System Clear / Reset
0 = Disabled
1 = Clear THR and Lockout Timers
2 = Reset to Factory Default Settings
1 0
F072
thru
F074
Reserved for Factory Use
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
