PAIRING WITH RADIO
Before the XBT headset can be used it must be paired with
a radio.
1. Turn off any radios previously paired with the headset.
2. Ensure Bluetooth is enabled on the radio. Contact your
radio dealer if unsure.
3. Power up the headset.
4. Place the headset in pairing mode by pressing and
holding the volume up and down buttons together
for 5 seconds. The left indicator light will be blue and
momentarily flash off while pairing mode is active.
5. Follow radio pairing instructions to pair the XBT headset
with the radio. If prompted for a passkey enter 0000.
6. Once paired the headset will automatically connect
and the left indicator light will show a blue slow flash once
connected. Note: It may take up to 90 seconds to connect.
Note: When entering pairing mode the headset forgets all
previously paired devices.
LEFT INDICATOR LIGHT
Blue slow flash: Bluetooth connected
Blue momentary off: Headset in pairing mode
Blue on: PTT active
TESTING CONNECTION
While wearing the headset press and hold the PTT
button to communicate through the radio system.
RECONNECTING
When the headset is powered up it will automatically
attempt to reconnect to the last paired radio.
Note: If the bluetooth connection is lost press the PTT
button to initiate a reconnection from the headset. If
you have problems reconnecting, check the radio is
discoverable.
Note: You may exist pairing mode on the headset by
pressing the PTT button.
4
English
