Motorola WMC6300, User Manual

Page: 33 / 74

MOTOMESH 1.0 Wireless Modem Card Users Guide
6881011Y52-O August 2005
3-3
result in excess pressure being applied to the connection between
the WMC connector and the board, which could crack or otherwise
damage a solder joint.
.
2
Pull straight out at the connector to avoid damaging the card, connector or cable.
Connecting the Magnetic Antenna Assembly (Optional)
Complete the following procedure to install the Magnetic Mount Antenna on the rooftop of a vehicle.
The length of the Antenna cable is approximately 12 feet.
Procedure 3-3 Installing the Magnetic Mount Antenna Assembly
1
Attach the Magnetic Antenna to the metal rooftop of the vehicle so that the antenna is in a vertical
orientation.
The base of the antenna contains a powerful magnet that secures
the antenna to the rooftop. Use care when attaching the antenna.
2
Route the remaining 12 foot cable as required, to arrive at the Host Computer.
Never use the WMC6300 or the WMC7300 with the Antenna
removed from the rooftop, or with the Antenna disconnected from
the Card.
3
Insert the Antenna Cable Connector into the WMC6300 antenna port as shown in Figure 3-2 .
The connector will snap into place when fully inserted.
Figure 3-2 Attach Magnetic Mount Antenna to the WMC6300