manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 561

Diagnostics 11 - 7

11.3 Advanced

Use the Advanced diagnostics screens to review and troubleshoot potential issues with the access point’s 

User Interface 

(UI). The UI Diagnostics screen contains tools to effectively identify and correct access point UI issues. Diagnostics can 
also be performed at the device level for connected clients.

11.3.1 UI Debugging

Advanced

Use the UI Debugging screen to view debugging information for a selected device.

To review device debugging information:

1. Select 

Diagnostics

 > 

Advanced 

to display the UI Debugging menu options.

Once a target ID is selected, its debugging information displays within the 

NETCONF Viewer 

by default. 

Figure 11-5

UI Debugging screen - NETCONF Viewer

2. Use the 

NETCONF Viewe

r to review NETCONF information. NETCONF is a tag-based configuration protocol. 

Messages are exchanged using XML tags.

The

 Real Time NETCONF Messages

 area lists an XML representation of any message generated by the system. 

The main display area of the screen is updated in real time.

Refer to the 

Request Response

 and 

Time Taken

 fields on the bottom of the screen to assess the time taken to 

receive and respond to requests. The time is displayed in microseconds.

Use the 

Clear

 button to clear the contents of the Real Time NETCONF Messages area. Use the 

Find

 parameter and 

the 

Next

 button to search for message variables in the Real Time NETCONF Messages area. 

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands