Configuration
Section 3
WA840
3-31
Blocking Internet Use at All Times – Using IP Addresses
For this example, we assume that:
•
there is one PC to be restricted, and
•
the IP address assigned to that PC is 192.168.40.4.
Step 1:
At
LAN Usage Filters
, under
LAN IP Address Range
, on consecutive lines enter
the IP address(es) of the PC(s) to be restricted.
NOTE:
If you intend to restrict multiple clients in the home, it is best to assign them consecutive
IP addresses, to allow you to enter a single LAN IP Address Range without disabling
another client.
Step 2:
Under
Protocol
, select
TCP
on one line and
UDP
on the next.
Step 3:
Under
Destination Port Range
, enter the entire port range (0 through 65535)
on both lines.
Step 4:
At the end of each line, check the
Enabled
box to engage the filters.
Step 5:
At the bottom of the page, click the
Apply
action button.
