8
VCD9500/VBC9500
4.
Fasten it using four #10 washers and four #10-32
self-locking nuts.
Power Connection
Please read all of these instructions before
beginning.
To connect the cradle to power:
1.
Locate the vehicle power source.
CAUTION
Do not install a Vehicle Cradle
on or near an air bag cover plate or within
an aerobic zone. Also, do not install it in a
location that affects vehicle safety or
driveability.
WARNING
!
A properly trained technician
must perform the power connection.
Improper connection can damage your
vehicle, cradle or mobile computer. Refer
to the vehicle’s Owner’s Manual for
instructions for removing power.
CAUTION
When setting up connection for
this cradle, only use the power input cable
provided with this cradle.
