manualshive.com logo in svg

Motorola V235, Service Manual

Share
Download
Motorola V235 Service Manual Download Page 40

40

 

          April 03, 2006

6809495A43-C

Disassembly

 V235 GSM

Removing and Replacing the Motor Vibrator Assembly

1.

Remove the battery cover, battery, SIM, antenna, rear housing, and 
transceiver board assembly, flip assembly cover, and CLI lens cover as 
described in the procedures.

2.

Use the disassembly tool to carefully lift the motor/vibrator assembly and flex 
from the flip assembly (see Figure 22). .

3.

Slide the flex connector through the opening in the flip hinge.

4.

To replace, thread the flex connector through the slot in the flip hinge.

5.

Remove the adhesive backing from the motor/vibrator and flex.

6.

Align the motor/vibrator to its location in the flip assembly.

7.

Gently but firmly press the motor/vibrator and flex into it’s pocket until 
properly seated in the flip assembly.

8.

Replace the camera assembly, display assembly, flip assembly cover, flip 
assembly, transceiver board, rear housing, antenna, SIM, battery, and battery 
cover as described in the procedures.

G

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when 
handling.

Figure 22. Motor/Vibrator Assembly Removal

G

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when 
handling.

Motor/Vibrator/Flex

Summary of Contents for V235

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands