Motorola TEAM Badge (EWB100), Deployment Manual

Page: 26 / 146

EWB100 Usage and Deployment Guide Rev 1.13
Page 26
5.2.3 Security modes
This command defines the acceptable security modes for the radio. The format
is:
set radio security xyz
Where xyz is a string that defines the target security mode. Acceptable values
are:

none

wep 64 (40 bit wep)

wep128 (128 bit wep)

tkip

aesccmp
The default is “none”
5.2.4 User Default Security Mode
This command sets the “user default” security mode. This value is used when the
system configuration is returned to “system defaults”. It has the same syntax and
default values as the security mode command:
set radio defsecurity xyz
5.2.5 WEP Security Key
This command sets the key values when WEP is used. The format is:
set radio key x abcd
Where x is the WEP key index (0-3) and abcd is a WEP key value associated
with the index..It is either 10 or 26 hex digits depending on the WEP option
selected.
5.2.6 WEP index
This command sets which WEP key will be used for data transfers. The format is
set radio index x
Where x defines the WEP key index to be used. Its values are from 0 to 3.
The default is 0.