7
English
Note: There is a short delay between the time you start
talking and when the radio transmits.
Dual Channel Monitor
Enables you to scan the current channel and another channel
alternately.
To set another channel and start Dual Channel:
1. Press
Menu button five times until the Dual Channel
icon appears. The Dual Channel will flash.
2. Press
or
to select the channel then press
Menu
button.
3. Press
or
to select the Interference Eliminator Code.
4. Press the
PTT
button to exit menu or
Menu button to
continue set up.
5. The radio starts to Dual Channel.
Note: If you set the same channel and code as the current
channel, Dual Channel Monitor turns OFF.
Silent Mode (Vibrate Alert)
Silent Mode (Vibrate Alert) notifies you that your radio is
receiving a message. This is useful in noisy environments.
When the alert is on, the radio vibrates once every 30 seconds
when you receive a message on the channel and code you set.
1. Press
Menu button seven times until Vibracall
icon
is displayed. The current setting will flash.
2. Press
or
to change the setting to On/Off.
3. Press the
PTT
button to exit menu or
Menu button to
continue set up.
Keypad Tones
You may enable or disable the speaker key tones. You will hear
the key tone each time a button is pushed.
1. Press
Menu button eight times until Keypad Tone
icon appears. The current setting On/Off will flash.
2. Press either
or
to turn On/Off.
3. Press the
PTT
button to confirm or
Menu button to
continue set up.
Note: The following are not disabled when the key tone
feature is OFF:
•Transmit time-out alert tone
•Call tone
•Low battery alert tone or
•The transmitted talk confirmation tone
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone when you finish
transmitting. It is like saying “Roger” or “Over” to let others know
you have finished talking.
1. Press
Menu button nine times until the Roger Tone
icon appears. The current setting On/Off flashes.
2. Press
or
to turn On or Off.
3. Press the
PTT
button to set or
Menu button to continue
set up.
MN002243A01_.book Page 7 Tuesday, March 20, 2018 5:27 PM
