Motorola Talkabout T6400, User Manual, Page: 40 / 65

Ad
vanc
ed T
w
o-W
a
y
28
Channel Scanning
By using
SCAN
, you can monitor channels and codes for
transmissions and lock in on the one that interests you.You don’t
have to set a new channel or code, the radio just resets itself
temporarily to that channel and code and you can start talking.
However, if no transmissions take place for five seconds, scanning
resumes.
After you turn on
SCAN
, your radio scans channels and codes until it finds an active
one and locks on to it. If you do not begin talking or no one else transmits within a
short time, it will resume scanning.
If you want to scan channel frequencies without interference eliminator codes,
change your code to
0
.
Turning on Channel Scanning
To set channel scanning, select the
TWO WAY
mode and the
SET SCAN
menu.
Your channel/code screen displays
h
and scrolls through channels when scanning is
turned on.
6864110r05o.book Page 28 Friday, October 12, 2001 8:35 AM