Other Features
Talk Confirmation Tone:
Whenever you turn on the talk confirmation tone feature, your radio
transmits a unique tone when you finish transmitting, and sounds
the tone locally on your radio.
To enable or disable this feature press and hold the up
]
button
as you turn on your radio.
Ring Mode:
Talkabout
TM
T6202 and T6212 radios allow you to select Ring alert
when receiving the first incoming transmission. Ring is then
suspended until 30 seconds after channel activity has finished.
To Select Ring:
1. Press the
\
button until the
B
icon appears
in the display.
2. The large channel number is replaced with a
Y
for enabled or
n
for disabled.
3. Use the up
]
or down
[
button to select
Y
for enable.
4. The radio will return to the normal operating mode after ten
seconds or when you quick-press
M
or
R
.
Short Menu:
Talkabout
TM
T6202, T6212 and T6222 radios have a Short Menu
feature which allows you to limit the number of menus displayed
to Channel, Interference Eliminator Code and Call Tones. The
Channel Scan function is also disabled, to prevent accidentally
changing the radio’s mode of operation. When short menu is
enabled the only radio turn on sequence available is short menu
disable. The menu time-out time is increased to 60 seconds.
1. To activate the Short Menu, press and hold the
\
button,
while turning the radio on.
2. To disable the Short Menu, turn the radio off, then press and
hold the
\
button, while turning the radio on.
Lock:
Talkabout
TM
T6202, T6212 and T6222 radios have a Lock feature
which allows you to disable Menu, Scan and volume control (up
]
and down
[
buttons) so that the radio settings cannot be
changed accidentally.
1. To activate the Lock feature, press and hold the
\
button, until
the lock enable alert sounds and the
f
icon appears on the display.
2. Disabled buttons will beep if pressed (when the Alert tones are enabled).
3. To disable the Lock feature, press and hold the
\
button again
until the lock disable alert sounds and the
f
icon disappears.
Light:
Talkabout
TM
T6202, T6212 and T6222 radios have a backlit display for
use in low-light conditions. Press the
R
button briefly to illuminate the
display. The light will turn on for four seconds. Pressing any button will
start or extend the period of time for which the display is illuminated.
Alert Tones:
The Alert tones can be disabled by turning on the radio while
pressing the down
[
button. Transmit Time-out Timer and low
battery alert tones are not disabled.
To re-activate the Alert tones, turn the radio off and then on again
while holding the down
[
button.
8 English
6
