Motorola T180, Manual, Page: 63 / 85

Using the Options Menu
61 English
j
New Security Code
The security code is used to control access to security and
other options within the menus.
This option is used to change the security code, which is set
at manufacture to 000000.
Once selected, you will be asked to enter the current
security code before you can proceed.
You will then be asked to enter a new, six digit code to
replace the old security code.
A
In order to safeguard your phone, you should change
your security code from the factory setting as soon as
possible.
j
Language Selection
This option is used to change the language for display
messages.
The option has multiple settings.
When you select a language, all further display prompts
and help messages will be in the selected language.
Change Greeting
Changes the message displayed when you switch on your
phone. May not be available if pre-programmed by your
Service Provider.
Battery Saving Mode
This option can help you to conserve battery power by
activating DTX (Discontinuous Transmission), and
deactivating the backlight for incoming Cell Broadcast
messages.
The option has two settings,
On
or
Off
.
j
Select Keypad Tones
This option allows you to change or disable tones you hear
when you press a key.
The option has three settings,
Normal Tones
,
Single
Tone
or
No Tones
.
Angel.book Page 61 Monday, April 24, 2000 8:04 PM