Motorola Symbol TC70 User Manual Download Page 17

Page: 17 / 166

Chapter

Getting Started

This chapter provides information for getting the device up and running for the first time.

Unpacking

Procedure:

Carefully remove all protective material from the TC70 and save the shipping container for later storage and
shipping.

Verify that the following were received:

• TC70 mobile computer
• 4,620 mAh Lithium-ion battery
• Hand strap
• Regulatory Guide
• Quick Start Guide.

Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer Support
center immediately.

Prior to using the TC70 for the first time, remove the protective shipping film that covers the scan window,
display and camera window.

| Getting Started

Summary of Contents for Symbol TC70







































































































































































Search results

Summary of Contents for Symbol TC70

Reviews:

Related manuals for Symbol TC70

Brands by name

Popular brands

Motorola Symbol TC70, User Manual

Search results

Summary of Contents for Symbol TC70

Reviews:

Related manuals for Symbol TC70

Brands by name

Popular brands