Motorola Symbol DS9808-DL00007C1WR, Manual

Page: 30 / 80

3 - 4 Symbol DS9808-R Product Reference Guide Supplement
RFID Preferences
The parameters in this chapter control RFID behavior.
Multifunction Mode Triggering
You can set trigger options for each of the digital scanner’s trigger positions. For example, set Trigger A (pressed
with your index finger) to imager decoding, set Trigger B (pressed with your middle finger) for laser decoding, and
set Trigger A + B (pressed with both fingers) for RFID reading.
The default operation is single trigger, so if you do not assign values to each trigger option (or assign Trigger A
only), Trigger B operates the same as Trigger A, and a dual trigger pull is ignored.
Select one of the following functions for each trigger using the bar codes on the next few pages:
•
Laser Preferred Decoding - Programs the trigger for decoding using the laser engine first, then the imager
if a decode does not occur. Refer to the Symbol DS9808 Product Reference Guide for more information.
DS9808-SR/DL models do not support this option.
•
Imager Decoding - Programs the trigger for decoding using the imager engine.
•
RFID Reading - Programs the trigger for reading RFID tags.
•
Imager Plus RFID - A trigger pull attempts decode using the imager engine, and turns on the optional RFID
reader, if available, to read RFID tags.
•
Laser Preferred Plus RFID - A trigger pull attempts decode using the laser engine first, then the imager if a
decode does not occur, and also turns on the RFID reader to read RFID tags. DS9808-SR/DL models do not
support this option.
•
Laser Only Decoding - Programs the trigger for decoding using the laser engine only. DS9808-SR/DL
models do not support this option.
•
Set to Trigger A Value (Trigger B Only) - Sets Trigger B to the same value as Trigger A. This allows you to
automatically program Trigger B upon selecting the function of Trigger A.
•
Ignore Dual Trigger Pull (Trigger A+B Only) - Uses the mode of the first trigger pull only. This increases
triggering efficiency when the dual trigger is not needed.
Figure 3-1
Trigger Locations
Trigger A
Trigger B