Motorola Symbol DS6878 Product Reference Manual Download Page 612

Page: 612 / 629

Glossary - 4

DS6878 Product Reference Guide

Hz. Hertz; A unit of frequency equal to one cycle per second.

IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser

operation classes based on power output during operation.

IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of

120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's
oscillating mirror fails.

Intercharacter Gap. The space between two adjacent bar code characters in a discrete code.

Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved

spaces. Interleaving provides for greater information density. The location of wide elements (bar/spaces) within each

group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only

numeric (0 to 9) and START/STOP characters may be encoded.

Interleaved Bar Code. A bar code in which characters are paired together, using bars to represent the first character and

the intervening spaces to represent the second.

Input/Output Ports. I/O ports are primarily dedicated to passing information into or out of the terminal’s memory. Series

9000 mobile computers include Serial and USB ports.

I/O Ports. interface The connection between two devices, defined by common physical characteristics, signal

characteristics, and signal meanings. Types of interfaces include RS-232 and PCMCIA.

Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and Decrypting.

LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser is

all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy
density.

Laser Diode. A gallium-arsenide semiconductor type of laser connected to a power source to generate a laser beam. This

laser type is a compact source of coherent light.

Laser Scanner. A type of bar code reader that uses a beam of laser light.

LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The

semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's particular
chemical composition.

Summary of Contents for Symbol DS6878






















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Symbol DS6878

Reviews:

Related manuals for Symbol DS6878

Brands by name

Popular brands

Motorola Symbol DS6878, Product Reference Manual

Search results

Summary of Contents for Symbol DS6878

Reviews:

Related manuals for Symbol DS6878

Brands by name

Popular brands