Mobile Antenna Installation
9
Mini-UHF Connector Installation #28-84606M01
Installation Instructions
Use Motorola tool part # 66-80388A26 (Refer to
Figure 8
).
1. Slip ferrule and collar onto cable. See
Figure 10
.
2. Prepare cable to strip dimensions as per
Figure 11
.
3. Insert stripped cable into plug body until conductor is exposed (front end) and dielectric
bottoms inside body. See
Figure 10
.
4. Crimp center contact using crimp area C of
Figure 8
. Crimp at base of center contact, avoid
crimping at the tip. Refer to
Figure 9
.
5. Push collar forward onto plug assembly. Fit cable braid over support sleeve of connector. See
Figure 10
.
6. Push ferrule over braid until flange butts against connector body. Refer to
Figure 10
. Using
the correct crimp area of tool, crimp ferrule close to plug body. Crimp ferrule for a second time
close to cable end.
7. Protuding center conductor should be trimmed with end of center contact.
Figure 8. Motorola Crimping Tool 66-80388A26
.256
.319
.068
.051
.213
A
B
C
D
E
FIVE CRIMP AREAS
