2
2.
Charge
Fully charge before use. Any attempt to remove or replace your battery will damage your headset.
•
Charge: Before use, charge until the status light turns blue.
•
When battery runs out, charge headphones for 1 second before using with included headphone
cable to continue listening.
3.
Connect & Go
Note:
The Battery should only be removed by a recycling facility. Any attempt to remove or
replace your battery will damage the product and void your warranty.
Caution:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED PRODUCT PROPERLY.
Wall charger not
included
Turn Bluetooth on
On
Turn headset on(charge before use)
Long press for 4 sec
Status Light
–
Blue flash rapidly Go to your
Bluetooth setting and pair ‘Escape 500 ANC’
