Motorola SE4710, Integration Manual

Page: 35 / 82

Specifications 3 - 5
Technical Specifications
Table 3-6
SE4710 Technical Specifications
Item Description
Power Requirements - Input Voltage
See Supply Currents VCC =
VCC_ILLUM = VDD_IO_HOST = 3.3V
@ 23C
VCC: 3.3V +/- 0.3V
VCC_ILLUM: 3.3V +/- 0.3V
VDD_IO_HOST: 1.8V +/- 0.1V to VCC
Maximum Sensor Power Supply Noise
(VCC at 23° C) 100 mVp-p (3.3 V, 10 Hz - 100 kHz) for decoding
30 mVp-p (3.3 V, 10 Hz - 100 kHz) for image capture
Optical Resolutions 5.0 mil (Code 39), 5.0 mil (PDF417)
Specular Dead Zone
Illumination On
Illumination Off
Up to 20º depending on target distance and substrate glossiness
None
Skew Tolerance ± 60º (see Figure 3-5 on page 3-10 )
Pitch Angle ± 60º (see Figure 3-5 on page 3-10 )
Roll 360º (see Figure 3-5 on page 3-10 )
Ambient Light Immunity (Sunlight) 10000 ft. candles (107,639 lux)
Imaging Sensor
Image Resolution
Field of View (FOV)
1280 horizontal X 800 vertical pixels
42.0º horizontal, 28.0º vertical
Focusing Distance from Front of Engine 194mm / 7.64 inches
LED Aiming Element
LED
Aiming Dot Brightness Level
610nm
130 fcd nominal
Illumination System
LED
Pattern Angle
Hyper Red 660nm
50.3º horizontal, 32.0º vertical at 50% intensity
Shock 2000 G ± 5% applied via any mounting surface at -30º and 60º C for a
period of 0.85 ± 0.10 msec
2500 G ± 5% applied via any mounting surface at 23º C for a period of
0.70 ± 0.10 msec
Vibration Unpowered SE4710 withstands a random vibration along each of the X,
Y, and Z axes for a period of one hour per axis (6 G rms), defined as
follows:
20 to 80 Hz Ramp up at 0.04 G
2
/Hz at 3 dB/octave
80 to 350 Hz 0.04 G
2
/Hz
350 Hz to 2 kHz Ramp down at 0.04 G
2
/Hz at 3 dB/octave
ESD ± 2 kV HBM @ connector