Motorola SCOUT2300, User Manual, Page: 10 / 27

10 Getting Started
2. If the owner unit is turned ON, when the adapter is plugged in, the battery
icon in the screen’s top right corner will show that the battery is charging
by cycling the internal segments, The Blue LED in the top left corner lights
up to indicate the adapter is plugged in.
2.4 Registration (Pairing)
The Pet monitor is pre-registered to your Owner Unit. You do not need to
register it again unless the Pet Unit loses its link with the Owner Unit. To re-
register your Pet Unit, or register a new Pet Unit, follow the procedure below:
1. Press the
M
Menu button of the owner unit and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted, and
the / / / menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select , and press the OK
button to confirm.
4. 1 / 2 / 3 / 4 will pop up, press the
+
UP button or
-
DOWN
button to select the desired CAM and press the OK button to start
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press and hold the PAIR button underneath the pet unit until the owner unit
finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Pet Unit was registered previously, registering this current Pet Unit
again will overwrite the old registration.