Introduction
Installation
Troubleshooting
Glossary
License
SBV5121 VoIP Cable Modem User Guide
19
Setting Up a USB Driver in Windows XP
1
Insert the SBV5121 VoIP Cable Modem CD-ROM in the CD-ROM drive.
This CD contains the USB drivers
and must be inserted and read by the PC
before you connect the VoIP cable modem to the PC.
2
Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see
“Cabling and
Startup for a Single User”
on page 8. A few seconds after you complete the USB connection, the Found New
Hardware Wizard window is displayed:
3
Be sure “Install the software automatically” is selected.
4
Click
Next
. Windows automatically searches for the correct USB drivers and installs them. the installation is
successful, the following window is displayed:
5
Click
Finish
to complete the installation. Otherwise, be sure the
SBV5121 VoIP Cable Modem
CD-ROM is
correctly inserted in your CD-ROM drive.
When you finish setting up the USB driver, you can continue with
“Configuring TCP/IP in Windows XP”
on
page 26.
Although your VoIP cable modem model number may be different than in the images in this guide,
the procedure is the same.
