Quick Reference Guide
13
Protective Housing (Cap) Labeling
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
SEE QUICK REFERENCE MANUAL FOR PATENT COVERAGE AND LISTING
C
US
Lase
r Bar C
ode Scanner
9B97
Listed
Accessor
y I.T
.E.
LASER LIGHT-DO NOT STARE INTO BEAM
630-680nm LASER 1.0 MILLIWATT MAX OUTPUT
CLASS II LASER PRODUCT
LASERLIGHT - NICHT IN DEN STRAHL BLICKEN! LASER KLASSE 2
STARE ITO BEAM. IEC CLASS 2 LASER PRODUCT 630-680nM, 1.0 mW LASER
LUMIÈRE LASER-NE PAS REGARDER DANS LE FAISCEAU
APPARIEL À LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT
CAUTION
AVOID EXPOSURE - LASER LIGHT IS EMITTED
FROM THIS APERTURE - ÉVITER TOUTE
EXPOSITION - LUMIÈRE LASER
ÉMIS PAR CETTE
OUVERTURE
