T
R
OUBLESHOOTING
51
User Guide
Message Are Not Received
Confirm that the radios have the same Channel, Frequency,
Interference Eliminator Code and Scramble Code settings and are
consistent with the Repeater’s settings. Verify the range coverage
is appropriate and there are no obstacles or shielding.
Heavy Static or
Interference
Radios are too close to repeater; they must be at least five feet
apart. Radios are too far apart from the repeater’s antenna. Double
check to make sure there are no obstacles interfering with
Low Batteries
Recharge or replace Li-Ion battery. Replace AA batteries. Extreme
operating temperatures affect battery life.
Li-On Power LED Light
Does Not Come On
Check if repeater’s batteries are properly inserted and/or check
battery/charger contacts to be sure they are clean and charging pin
is inserted correctly.
Low Battery LED Blinking
Although New Batteries
Are Installed
Verify that the radio is set to the correct battery type and is well
positioned into the battery frame according to instructions.
Symptom
Try This... (Continued)
