32
March 27, 2006
6809497A99-O
Disassembly
E2
Removing and Replacing the Camera Module
1.
Remove the SD card, battery cover, battery, SIM, side bands, rear housing, as
described in the procedures.
2.
Use the disassembly tool to unseat the camera module connector from it’s
socket on the transceiver board.
3.
Lift the camera module off of the transceiver board (see Figure 14).
4.
To replace, align the camera module and connector to the socket on the
transceiver PC board.
5.
Press the camera connector gently until seated in it’s socket. Be careful not to
damage the camera flex.
6.
Replace the rear housing, side bands, SIM, battery, battery cover, and SD card
as described in the procedures.
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
051981o
Figure 14. Removing the Camera Module
Camera module
Camera module connector
Transceiver PC board
Disassembly tool
Summary of Contents for ROKR E2
Page 2: ......
Page 4: ...4 March 27 2006 6809497A99 O Contents ROKR E2 ...
Page 22: ...22 March 27 2006 6809497A99 O General Operation ROKR E2 ...
Page 51: ......
