Motorola RMU2080d, User Manual

Page: 41 / 96

English
39
PROGRAMMING F
E
ATURES
The radio display shows the CTCSS/DPL code
as follows:
To program the desired code, use the and
buttons until you get the CTCSS/DPL code
value you want to set up. Long press the PTT
button to exit and save, or short press the PTT
button to move to the next programming
feature without saving.
PROGRAMMING SCRAMBLE
The scramble feature makes your
transmissions sound garbled to anyone
listening without the same scramble code. It
does not guarantee confidentiality, but it adds
an extra layer of privacy. Scramble mode is by
default set to ‘OFF’.
Once you have entered Advanced
Configuration Mode and selected the channel
in which you want to enable Scramble ( ),
scroll up or down through the programming
modes by short pressing the PTT button or
(Menu) button until the radio reaches the
Scramble Programming Mode.
The radio display shows the Scramble settings
as follows:
The current scramble value blinks. You can
select the desired scramble value (0,1,2 or 3)
by pressing the
and buttons. Long
press the PTT button to exit and save, or short
press the PTT button to move to the next
programming feature without saving.
Note: The values available for scrambling are
dependent to the values programmed via