19
U
SING
Y
OUR
R
EMOTE
C
ONTROL
The remote control allows you to control TV viewing from anywhere in your home. Your NSP (or yourself) can program it to
operate your TV as well as your RG2200. The remote control operates by sending either IR (infrared) or UHF (ultra-high
frequency) signals to the RG2200. Your Network Service Provider programs your remote to operate in the most appropriate
mode for your home.
If your remote control is programmed for IR mode, it requires a direct line-of-sight in order to function. In other words, you
need to point an IR remote directly to the television or the RG2200. You can only use an IR remote to operate a TV that is
located in the same room as the RG2200. If your primary TV (TV1) located in a different room than the RG2200, the remote
must be programmed to use
UHF mode.
Remote controls that control secondary TVs (TV2, TV3), are also programmed to operate in UHF mode.
R
EMOTE
C
ONTROL
M
ODELS
Two models of remote control can be used with the RG2200. They are the SRC-300 and the SRC-200. To tell which model
you have, consult the label on the back of the remote control. The SRC-300 and the SRC-200 differ slightly. Both are
described in the following sections.
