RFS7000 Series RF Switch:
Installation Guide
20
5
Regulatory Information
This regulatory section applies only to the RFS-7010. For more information refer to Section 6,
Part
Numbers, Support, and Sales
.
All Motorola devices are designed to be compliant with rules and regulations in locations they are
sold and will be labeled as required.
Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void
the user’s authority to operate the equipment.
Local language translations are available at the following website: http://www.motorola.com/
services/manuals/.
Laser Devices - Gigabit Ethernet SFP Option
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated July 26, 2001.
EN60825-1:1994+ A1:2002 +A2:2001
IEC60825-1:1993+A1:1997+A2:2001
The laser classification is marked on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The
following statement is required to comply with US and international regulations:
Country Selection
Select only the country in which you are using the device. Any other selection will make the operation
of this device illegal.
Radio Frequency Interference Requirements - FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
CAUTION
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
!
!
