RFS4010 RF Switch:
Installation Guide
18
2.
On the configuration computer, configure a terminal emulation application
(such as
HyperTerminal
) as follows:
4.6 Supplying Power to the RFS4010 RF Switch
1.
Plug the power supply (Motorola Part Number: 50-14000-244R) into the power inlet at the back
of the RFS4010 RF Switch.
2.
Plug the cord into a standard AC outlet with a voltage range of 100 to 240 VAC.
Terminal Type
VT-100
Port
COM port
Terminal Settings
19200bps transfer rate
8 data bits
no parity
1 stop bit
no flow control
no hardware compression
Power Inlet
Summary of Contents for RFS4010 Series
Page 1: ...RFS4010 Series RF Switch Installation Guide M ...
Page 4: ......
