21
English
PROGRAMMING
PL/DPL CODES
PROGRAMMING PL/DPL
CODES
1.
Before you can program PL/DPL codes, you
should first enter “Programming Mode” by
pressing and holding both the PTT button and
the SB1 button simultaneously for three
seconds, while turning ON the radio. A unique
tone will sound, indicating that the radio has
entered ’Programming Mode’ and the radio
LED will signal a green heartbeat.
2.
Once the radio enters the ‘Programming Mode’,
(which defaults to ‘Idle’ Programming Mode)
the LED will blink a continuous green
heartbeat.
Note:
Whenever you enter ’Programming Mode’
the
icon will be displayed and the
current channel aliasing name will be
blinking to indicate that you can select the
channel you want to program.
To exit ‘Programming Mode’, long press the PTT
button to return to normal operation.
3.
Once you are in Programming Mode, scroll up/
down to select the different channels by
pressing the
/
buttons:
4.
Once you have chosen the channel you want to
program, short press the PTT button or
button in order to access the PL/DPL
programming option. The radio display will
show the blinking PL/DPL code as follows:
5.
To program the desired code, scroll up/down
with the
/
buttons until you get the PL/
DPL code value you want to set up.
M E N U
