Motorola PRO2150, User Manual, Page: 11 / 24

99R85451E01 June 28, 2002
Programming Mode 5
Backlight Select
(LGT-XXXX) LGT-AUTO, LGT-TOGL Selecting LGT-TOGL makes the Backlight button a
toggle to control the ON/OFF status of the display
backlight. Selecting LGT-AUTO causes the backlight to
automatically extinguish if there is no keypress for more
than five seconds. Pressing the
Backlight button
prolongs illumination time.
Access Code
1
(AC CODE)
16 characters consisting
of 1,2, …, 9, 0, A, B, C, D,
*, # and Pause. Dial the Access Code when you want to access a land-
line telephone network. Once it is programmed, send the
code by pressing the
PTT , and then + followed by *. You
can enter a Pause by pressing * and then #. To
completely erase numbers already entered, enter # 16
times.
De-access
1
(DA CODE)
16 characters consisting
of 1,2, …, 9, 0, A, B, C, D,
*, # and Pause. Dial the De-access Code when you want to disconnect
from a land-line telephone network. Once it is
programmed, send the code by pressing the
PTT ,
followed by + and then #. You can enter a Pause by
pressing * and then #. To completely erase numbers
already entered, enter # 16 times.
Telephone
Number
1
(TELNO-X)
16 characters consisting
of 1,2, …, 9, 0, A, B, C, D,
*, # and Pause. Up to nine telephone numbers can be programmed. The
phone numbers can be recalled using the speed dial
feature by pressing the
PTT , and then + followed by the
telephone number location in the phone list. You can
enter a
Pause by pressing * and then #. To completely
erase numbers already entered, enter # 16 times.
1. Each Pause entered shortens the code/number length by one digit.
Feature Range Remarks